The following equipment is required to carry out a quick and effective inspection check of a laser, either rigged or unrigged
1. Notepad, inspection forms, folders
2. Measurement stamp / waterproof ink / stamp pad (2 minimum and one with the logo of the event used only to stamp the sails), permanent markers, paint markers (useful for colours spars and distinctive from usual markers), pens and pencils
3. Steel measuring tape
4. Ilca template: rudder angle, centreboard and rudder thickness, sail numbers template + electrical tape to be used to correct rudder angle
5. Measurement jigs for spars and battens
6. Copy of measurement and inspection guide
7. Copy of laser class rules (handbook of the year which also contains the bye law)
8. Plastic tape, 1 large table (2 x 3 metres) + 1 smaller one (the tape can be used to mark out batten length templates on the table. The tables are useful for sail folding and for the rudder pin to reduce the angle of 78 degrees)
9. Tent (ideally measurement at major events should take place under cover to protect from rain and sun)